1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體不繡鋼AISI隨著其鉻和鉬的硫含量高，碳的硫含量低，316型更具充分的耐結垢性。對於大長度，退火標準約為600MPa，同時對於小剖面，可不可以經由螺母化來增加。304不銹鋼有許多種合理的存量源于，及及不同的的廠品論文格式或方式，使您會是最好的地達到您的方案要求。我們都的服務性中心點也才可以私人訂制或切割成一小塊。數字9名稱大全：W、 產品編號1.4404–1.4401（316）–US S31603–316L標準規范：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes包括應用大量采用涵蓋機戒、化學工業、石油工業、座鐘、農林業飲食和醫療設備設備企業的的產品。一些板材不錯應用于大剖面積或小剖面的超蘸火(淬火)形態。